Technical Specification

Description

  • Y-Pattern And One Piece Casting Body
  • Bolted Cover With Blow Off Connection
  • Strainer Body Meets Applicable ASME
  • Standard
  • Upper And Lower Machined Seats
  • SS 304 Screens Are Standard
  • Drain/Blow-Off Connection Furnished
  • With Plug As Standard
  • Straining Area: Nominal Flow Area =3:1 (Minimum)
  • Properly Proportioned Straining Chamber To
  • Minimize Initial Pressure Drop While
  • Maximizing Time Between Cleanings

Application

  • Process Industry
  • Power Industry
  • Oil and Gas
  • Pulp and Paper
  • Metal and Mining
  • Water and Waste Management Systems

Size

SIZE

(mm)

  

   A

  

   B

 Table – E CI-150  

   I

  

   J
C D E F C D E F G H
25 160 25 114.3 82.55 12.70 14.30 110 79.4 9.6 15.87 2 50.8 4 110
32 180 32 120.65 87.31 15.88 14.30 115 88.9 11.2 15.87 2 63.5 4 120
40 200 40 133.35 98.42 15.88 14.30 125 98.4 12.7 15.87 2 73.0 4 145
50 230 50 152.40 114.30 19.05 17.50 150 120.7 14.3 19.05 2 92.1 4 165
65 290 64 165.10 127.00 19.05 17.50 180 139.7 15.9 19.05 2 104.8 4 225
80 310 76 184.15 146.05 19.05 17.50 190 152.4 17.5 19.05 2 127.0 4 260
100 350 100 215.90 177.80 22.22 17.50 230 190.5 22.3 19.05 2 157.2 8 300
125 400 125 254.00 209.55 22.22 17.50 255 215.9 22.3 22.22 2 185.7 8 350
150 450 150 279.40 234.95 22.22 22.00 280 241.3 23.9 22.22 2 215.9 8 395
200 600 200 336.55 292.10 25.40 22.00 345 298.5 27.0 22.22 2 269.9 8 460
250 730 250 406.40 355.60 25.40 25.40 405 362.0 28.6 25.40 2 323.8 12 635
300 850 300 457.20 406.40 28.58 25.40 485 431.8 30.2 25.40 2 381.0 12 700

Material

S. No PART NAME MATERIAL SPECIFICATIONS
1 BODY CAST IRON IS 210 Gr. FG200
2 BONNET CAST IRON IS 210 Gr. FG200
3 STRAINER STAINLESS STEEL S.S TYPE 304
4 GASKET/O-RING RUBBER EPDM/NIRILE
5 NUT & BOLTS CAEBON STEEL ASTM A307 Gr.B
6 PLUG MILD STEEL ——

Technical Data

TEST PRESSURE
SIZE SHELL
25mm 24 Kg/cm2
200mm-300mm 15 Kg/cm2

Standards

Design Standard                      :          ASME B16.34

Face to face dimension        :       DIN 3202 F1

End Detail                                   :      Flanged Ends to ASME B16.5 150# BS 10 Table E

Valve Testing                            :     API 598